Stainless Steel mesh mesh size 30mm, wire thickness 1mm, width 1.5m - cut to size
Product number:
430155
Product information "Stainless Steel mesh mesh size 30mm, wire thickness 1mm, width 1.5m - cut to size"
Specifications:
Width: 1.5 m
Wire thickness: 1.0 mm
Mesh size: 30 x 30 mm
Technology: Spot welded mesh, surface untreated
Material: 1.4301 Stainless Steel
Cut-to-size return excluded!
Assembly:
This system consists of stainless steel mesh of wire thickness approx. 1.0 mm with a square mesh size of 30x30 mm. The edge line, which runs through ring eyelets (eyelet spacing 20 to 50 cm, depending on the situation), serves as an outer frame where the net is fastened with ring clamps over the object to be protected. The net can be mounted horizontally (e.g. atriums, etc.) or vertically (e.g. building niches or entire facade areas, etc.).
Advantage: optimal protection
Disadvantage: slight visual impairment depending on severity
Application:
Dormers, statues / reliefs / niches, atriums, corners of houses, balconies, canopies, entire facades
Width: 1.5 m
Wire thickness: 1.0 mm
Mesh size: 30 x 30 mm
Technology: Spot welded mesh, surface untreated
Material: 1.4301 Stainless Steel
Cut-to-size return excluded!
Assembly:
This system consists of stainless steel mesh of wire thickness approx. 1.0 mm with a square mesh size of 30x30 mm. The edge line, which runs through ring eyelets (eyelet spacing 20 to 50 cm, depending on the situation), serves as an outer frame where the net is fastened with ring clamps over the object to be protected. The net can be mounted horizontally (e.g. atriums, etc.) or vertically (e.g. building niches or entire facade areas, etc.).
Advantage: optimal protection
Disadvantage: slight visual impairment depending on severity
Application:
Dormers, statues / reliefs / niches, atriums, corners of houses, balconies, canopies, entire facades
There aren't any asked questions yet.
