Stainless Steel Rope 0.54 mm thick 1x7 on Plastic Spool made of Stainless Steel
Product number:
1201
Product information "Stainless Steel Rope 0.54 mm thick 1x7 on Plastic Spool made of Stainless Steel"
Specifications:
Tear Strength Nom.0.249/ Test. 0.262 KN
Diameter: 0.54 mm
Assembly of the wires (one spring is mounted per section and 2 sleeves) Cut stainless steel cable to the appropriate length with a reserve of approx. 20-25 cm.
1. On the eyelet screw without spring: The stainless steel cable is passed through the sleeve and then through the eyelet screw. The rope is then pulled through the sleeve again and the resulting loop is tightened to the eyelet screw. Squeeze the sleeve with the clamping pliers - to be on the safe side, squeeze in two places.
2. On the spring: Hook the spring to the eyelet screw, pull the other side of the rope through the sleeve, then pass it through the other eye of the spring and through the sleeve again. Tighten the end of the rope to tension the spring, push the sleeve forward to the eyebolt, hold on and squeeze the sleeve twice. Pinch off the rest of the rope immediately behind the sleeve. In order to ensure the best possible protection, stainless steel cables with a diameter of 0.54 mm must be tensioned at intervals of approx. 3.5 cm, parallel to each other.
Tear Strength Nom.0.249/ Test. 0.262 KN
Diameter: 0.54 mm
Assembly of the wires (one spring is mounted per section and 2 sleeves) Cut stainless steel cable to the appropriate length with a reserve of approx. 20-25 cm.
1. On the eyelet screw without spring: The stainless steel cable is passed through the sleeve and then through the eyelet screw. The rope is then pulled through the sleeve again and the resulting loop is tightened to the eyelet screw. Squeeze the sleeve with the clamping pliers - to be on the safe side, squeeze in two places.
2. On the spring: Hook the spring to the eyelet screw, pull the other side of the rope through the sleeve, then pass it through the other eye of the spring and through the sleeve again. Tighten the end of the rope to tension the spring, push the sleeve forward to the eyebolt, hold on and squeeze the sleeve twice. Pinch off the rest of the rope immediately behind the sleeve. In order to ensure the best possible protection, stainless steel cables with a diameter of 0.54 mm must be tensioned at intervals of approx. 3.5 cm, parallel to each other.
There aren't any asked questions yet.