Solar Clip G black made of stainless steel for 30 mm frames - welded/fixed tips
| Quantity | Unit price |
|---|---|
| To 99 |
€1.00*
previously €1.00*
|
| From 100 |
€0.90*
|
Available, delivery time: 1-3 days
Product information "Solar Clip G black made of stainless steel for 30 mm frames - welded/fixed tips"
A registered product of ZIWI
Installation Instructions/Assembly Instructions
The 30mm solar clip is designed for pigeon deterrent attachment of falling spikes, suitable for most solar panel manufacturers with a frame height of 30 mm and a locking lug width (frame profile - top of solar panel) of approximately 10 mm.
No warranty restrictions due to drilling or other manufacturer restrictions.
1. Check in advance whether the clips are suitable for your solar frame and whether your spike strips correspond to this installation type.
2. Place the spike strip flush with the module frame (the strip must not protrude beyond the module frame).
3. First, place the clip on top of the edge module and then press the clip firmly against the module frame at the bottom.
4. For a strip length of 1 meter you need 5 clips.
5. If removed, the solar clip will be deformed and therefore cannot be used for a new installation.
The Solar Clip is compatible with the following items: 210369(SCH), 2103599(SCH), 210329(SCH), 210379(SCH), 210393, 21036, 21035, 210315, 21032, 21037, 21039
Application: Solar systems, Photovoltaic systems