Solar Clip F schwarz aus Edelstahl für fallende Spikes
Product number:
2840FSCH
Product information "Solar Clip F schwarz aus Edelstahl für fallende Spikes"
A registered product of ZIWI
Installation Instructions/Assembly Instructions
The 40mm solar clip is designed for pigeon deterrent attachment of falling spikes, suitable for most solar panel manufacturers with a frame height of 40 mm and a locking lug width (frame profile - top of solar panel) of approximately 10 mm.
No warranty restrictions due to drilling or other manufacturer restrictions.
1. Check in advance whether the clips are suitable for your solar frame and whether your spike strips correspond to this installation type.
2. Place the spike strip flush with the module frame (the strip must not protrude beyond the module frame).
3. First, place the clip on top of the edge module and then press the clip firmly against the module frame at the bottom.
4. For a rail length of 50 cm, we recommend 3 clips; for 1 meter, 5 clips.
5. If removed, the solar clip will be deformed and therefore cannot be used for a new installation.
The Solar Clip is compatible with the following items: 2103F110(SCH), 2103F170(SCH), 215F240(SCH), 2103V110(SCH), 2103V170(SCH), 211F110(SCH), 211F170(SCH), 211V110SCH and 211V170SCH.
Application:
Solar systems
Photovoltaic systems
There aren't any asked questions yet.