Ridge Holder Set for 15 m Ridge with Complete Accessories
€130.00*
previously €130.00*
Available, delivery time: 1-3 days
Product number:
1071S15
Product information "Ridge Holder Set for 15 m Ridge with Complete Accessories"
Ridge Holder Set consists of:
11 pcs. Ridge holder Art. 1071 (adjustable from 210 mm to 410 mm)
55 pcs. Stainless steel tension springs Art. 1282
110 pcs Clamping sleeves 2 x 20 made of stainless steel Art. 1257
1 pc Stainless steel cable 100 m / 0.54 mm thick 1 x7 stainless steel Art. 1201
Specifications:
Cover width: up to 200 mm
Strap length: adjustable from 210 mm to 410 mm
Band width: 25 mm
Band thickness: 0.8 mm
Pin thickness: 4 mm
Pin length: 130 mm (new version with underflight protection)
Material: 1.4301 stainless steel
Assembly:
Clean the substrate, then attach the stainless steel holders at a distance of approx. 1.5 metres.
Mounting the wires (one spring is mounted per section and 2 sleeves) Cut the stainless steel cable to the appropriate length with a reserve of approx. 20-25 cm.
1. On the pin without spring: The stainless steel cable is passed through the sleeve and then through the hole on the pin. The rope is then pulled through the sleeve again and the resulting loop is tightened to the pin. Crush the sleeve with the clamping pliers – to be on the safe side, squeeze in two places.
2. On the spring: Hook the spring to the pin of the next holder, pull the other side of the rope through the sleeve, then pass it through the other eye of the spring and through the sleeve again. Tighten the end of the rope to tension the spring, push the sleeve forward to the pin, hold on and squeeze the sleeve twice. Pinch off the rest of the rope immediately behind the sleeve.
Application:
Roof ridge
11 pcs. Ridge holder Art. 1071 (adjustable from 210 mm to 410 mm)
55 pcs. Stainless steel tension springs Art. 1282
110 pcs Clamping sleeves 2 x 20 made of stainless steel Art. 1257
1 pc Stainless steel cable 100 m / 0.54 mm thick 1 x7 stainless steel Art. 1201
Specifications:
Cover width: up to 200 mm
Strap length: adjustable from 210 mm to 410 mm
Band width: 25 mm
Band thickness: 0.8 mm
Pin thickness: 4 mm
Pin length: 130 mm (new version with underflight protection)
Material: 1.4301 stainless steel
Assembly:
Clean the substrate, then attach the stainless steel holders at a distance of approx. 1.5 metres.
Mounting the wires (one spring is mounted per section and 2 sleeves) Cut the stainless steel cable to the appropriate length with a reserve of approx. 20-25 cm.
1. On the pin without spring: The stainless steel cable is passed through the sleeve and then through the hole on the pin. The rope is then pulled through the sleeve again and the resulting loop is tightened to the pin. Crush the sleeve with the clamping pliers – to be on the safe side, squeeze in two places.
2. On the spring: Hook the spring to the pin of the next holder, pull the other side of the rope through the sleeve, then pass it through the other eye of the spring and through the sleeve again. Tighten the end of the rope to tension the spring, push the sleeve forward to the pin, hold on and squeeze the sleeve twice. Pinch off the rest of the rope immediately behind the sleeve.
Application:
Roof ridge
There aren't any asked questions yet.