ES-System Bird
| Quantity | Unit price |
|---|---|
| To 14 |
€12.50*
previously €12.50*
|
| From 15 |
€10.50*
|
Available, delivery time: 1-3 days
Product number:
1701
Product information "ES-System Bird"
Specifications:
Plastic strap: 33 mm wide and 9 mm high, milky-transparent; weatherproof
UV stabilized, with two integrated - black coated - stainless steel cables with a diameter D = 2 mm
Description:
In this milky-transparent, very flexible and visually inconspicuous plastic strap, two black-coated stainless steel cables running parallel are integrated at a distance of approx. 23 mm. When sitting on the belt, birds are sustainably driven away by a noticeable but harmless electrical impulse.
Plastic strap: 33 mm wide and 9 mm high, milky-transparent; weatherproof
UV stabilized, with two integrated - black coated - stainless steel cables with a diameter D = 2 mm
Description:
In this milky-transparent, very flexible and visually inconspicuous plastic strap, two black-coated stainless steel cables running parallel are integrated at a distance of approx. 23 mm. When sitting on the belt, birds are sustainably driven away by a noticeable but harmless electrical impulse.
Pulse generator: CE certified electric fence device; German manufacturer
Two-core high-insulation cable
The low design of only approx. 9mm makes the system particularly inconspicuous.
Assembly:
1. The E-Bird tape is glued directly to the substrate - after recommended surface pre-treatment of the areas to be protected with the primer. In order to avoid a possible curvature of the strip, so-called expansion bridges should be installed for each object. The curvature can be caused by the different elongation properties of the profile and the substrate. This applies to all areas clad in sheet metal. In the case of solid masonry, this necessity does not exist.
Note: the choice of adhesive is based on the surface properties of the existing building fabric.
2. Current and ground-conducting conductors are integrated into the profile to avoid the risk of short circuits.
Note: Individual connections in the corners, as well as the strap extensions of the Bird profile are made with specially adapted sleeves and springs.
Two-core high-insulation cable
The low design of only approx. 9mm makes the system particularly inconspicuous.
Assembly:
1. The E-Bird tape is glued directly to the substrate - after recommended surface pre-treatment of the areas to be protected with the primer. In order to avoid a possible curvature of the strip, so-called expansion bridges should be installed for each object. The curvature can be caused by the different elongation properties of the profile and the substrate. This applies to all areas clad in sheet metal. In the case of solid masonry, this necessity does not exist.
Note: the choice of adhesive is based on the surface properties of the existing building fabric.
2. Current and ground-conducting conductors are integrated into the profile to avoid the risk of short circuits.
Note: Individual connections in the corners, as well as the strap extensions of the Bird profile are made with specially adapted sleeves and springs.
There aren't any asked questions yet.