1 Row of Falling Solar Spikes, BLACK, 50 cm long made of Stainless Steel, bent by 90 degrees
Product number:
2103LF170SCH
Product information "1 Row of Falling Solar Spikes, BLACK, 50 cm long made of Stainless Steel, bent by 90 degrees"
Specifications:
Bar thickness of the tips: 2.0 mm
Bar length of the tips: falling up to 170 mm (188 mm with strip), bent 90 degrees to the base strip
Center spacing: 25 mm
Technology: Pinned (movable) - New! A protected product of the company ZIWI
Strap length: 500 mm (with 10 oval holes 4.2 x 10 mm)
Band width: 18mm+80mm
Band thickness: 0.8 mm
Material: 1.4301 stainless steel
Bar thickness of the tips: 2.0 mm
Bar length of the tips: falling up to 170 mm (188 mm with strip), bent 90 degrees to the base strip
Center spacing: 25 mm
Technology: Pinned (movable) - New! A protected product of the company ZIWI
Strap length: 500 mm (with 10 oval holes 4.2 x 10 mm)
Band width: 18mm+80mm
Band thickness: 0.8 mm
Material: 1.4301 stainless steel
Color: black matt powder-coated RAL 9005
Dimensions: 50cm x 17cm x 2cm
PU: 50lfm
PU Dimensions: 53cm x 18cm x 16cm
PU Weight: approx. 10,5 kg
Dimensions: 50cm x 17cm x 2cm
PU: 50lfm
PU Dimensions: 53cm x 18cm x 16cm
PU Weight: approx. 10,5 kg
Installation Notes / Tips:
- pay attention to the temperatures! No sticking to warm/hot modules. Therefore, if possible, start in the early hours of the morning (especially in the summer, before the panels heat up)
- before gluing, all surfaces should be cleaned. Only use alcohol-based cleaners or primers (surface should be free of dust and grease, no solvent!)
- To ensure good adhesion, the entire surface should be glued (do not use the glue sparingly), in addition, the profiles can be roughened with a metal brush or sandpaper. With a cartridge, up to 12 m should be glued over the entire surface (no more!), and the glue should also come out on the side and over the holes. After gluing, a 2 mm thick adhesive layer should still remain between the solar system and the spikes so that the materials can expand. If the tips are dismantled, the system remains undamaged.
- For older systems, outside the warranty period, the PV spikes can also be attached with screws. Please check first that there are no cables behind the frame
Application:- before gluing, all surfaces should be cleaned. Only use alcohol-based cleaners or primers (surface should be free of dust and grease, no solvent!)
- To ensure good adhesion, the entire surface should be glued (do not use the glue sparingly), in addition, the profiles can be roughened with a metal brush or sandpaper. With a cartridge, up to 12 m should be glued over the entire surface (no more!), and the glue should also come out on the side and over the holes. After gluing, a 2 mm thick adhesive layer should still remain between the solar system and the spikes so that the materials can expand. If the tips are dismantled, the system remains undamaged.
- For older systems, outside the warranty period, the PV spikes can also be attached with screws. Please check first that there are no cables behind the frame
Solar systems
Photovoltaic systems
There aren't any asked questions yet.
Soft Cleaner 500 ml for Metals and Glazed Surfaces (Removes Grease, Oils, Dust, etc.)
€12.00*
previously €12.00*