1 Row adjustable Solar Spikes with two Strips, 1 m long made of Stainless Steel
| Quantity | Unit price |
|---|---|
| To 9 |
€15.00*
previously €15.00*
|
| To 24 |
€14.50*
|
| From 25 |
€14.00*
|
Available, delivery time: 1-3 days
Product number:
2103249
Product information "1 Row adjustable Solar Spikes with two Strips, 1 m long made of Stainless Steel"
Specifications:
Bar thickness of the tips: 2.0 mm
Bar thickness of the tips: 2.0 mm
Bar length of the tips: adjustable up to 240 mm (max. 250 mm) measured without bar
Center spacing: 25 mm
Technology: Plugged (movable) - A protected product of the company ZIWI
Strap length: 1 000 mm (with 20 oval holes 4.2 x 10 mm)
Number of strips: 2 per piece (very good stability and therefore also suitable against martens)
Band width: 18 mm
Band thickness: 0.8 mm
Material: 1.4301 Stainless steel
Dimensions: 100cm x 27,5cm x 0,5cm
PU: 25lfm
PU Dimensions: 102cm x 30,5cm x 14cm
PU Weight: approx. 15 kg
Dimensions: 100cm x 27,5cm x 0,5cm
PU: 25lfm
PU Dimensions: 102cm x 30,5cm x 14cm
PU Weight: approx. 15 kg
Installation Notes / Tips:
- pay attention to the temperatures! No sticking to warm/hot modules. Therefore, if possible, start in the early hours of the morning (especially in the summer, before the panels heat up)
- before gluing, all surfaces should be cleaned. Only use alcohol-based cleaners or primers (surface should be free of dust and grease, no solvent!)
- To ensure good adhesion, the entire surface should be glued (do not use the glue sparingly), in addition, the profiles can be roughened with a metal brush or sandpaper. With a cartridge, up to 12 m should be glued over the entire surface (no more!), and the glue should also come out on the side and over the holes. After gluing, a 2 mm thick adhesive layer should still remain between the solar system and the spikes so that the materials can expand. If the tips are dismantled, the system remains undamaged.
- For older systems, outside the warranty period, the PV spikes can also be attached with screws. Please check first that there are no cables behind the frame
- the spikes should be glued upwards
- for the top edge and the sides of the solar system you can use longer spikes and then let them stick out so that the pigeons cannot sit on the frame.
- For the lower edge of the solar system, please use shorter spikes so that any snow masses do not tear off the tips when slipping. Optionally, the protruding spikes can be shortened with a bolt cutter.
- For effortless movement of the spikes, DO NOT simply pull them out by the bow, but press the individual spikes slightly together sideways (to release the tension) and move them to the desired length
- before gluing, all surfaces should be cleaned. Only use alcohol-based cleaners or primers (surface should be free of dust and grease, no solvent!)
- To ensure good adhesion, the entire surface should be glued (do not use the glue sparingly), in addition, the profiles can be roughened with a metal brush or sandpaper. With a cartridge, up to 12 m should be glued over the entire surface (no more!), and the glue should also come out on the side and over the holes. After gluing, a 2 mm thick adhesive layer should still remain between the solar system and the spikes so that the materials can expand. If the tips are dismantled, the system remains undamaged.
- For older systems, outside the warranty period, the PV spikes can also be attached with screws. Please check first that there are no cables behind the frame
- the spikes should be glued upwards
- for the top edge and the sides of the solar system you can use longer spikes and then let them stick out so that the pigeons cannot sit on the frame.
- For the lower edge of the solar system, please use shorter spikes so that any snow masses do not tear off the tips when slipping. Optionally, the protruding spikes can be shortened with a bolt cutter.
- For effortless movement of the spikes, DO NOT simply pull them out by the bow, but press the individual spikes slightly together sideways (to release the tension) and move them to the desired length
- a big advantage of mounting the adjustable spikes is that you can easily move the spikes when cleaning or repairing the system and thus have free access to the system.
Application:
Solar systems
Photovoltaic systems
There aren't any asked questions yet.
Soft Cleaner 500 ml for Metals and Glazed Surfaces (Removes Grease, Oils, Dust, etc.)
€12.00*
previously €12.00*