1 Row Solar Spikes 1 m long made of Stainless Steel
| Quantity | Unit price |
|---|---|
| To 9 |
€8.00*
previously €8.00*
|
| From 10 |
€7.50*
|
Available, delivery time: 1-3 days
Product number:
21037
Product information "1 Row Solar Spikes 1 m long made of Stainless Steel"
Specifications:
Bar thickness of the tips: 2.0 mm
Bar length of the tips: 150 mm (without bar)
Center spacing: 25 mm
Technology: 3-fold spot welded
Strap length: 1 000 mm (with 6 oval holes 4.2 x 10 mm)
Band width: 18 mm
Band thickness: 0.8 mm
Material: 1.4301 stainless steel
Dimensions: 100cm x 17cm x 0,1cm
PU: 80lfm
PU Dimensions: 104cm x 15cm x 21cm
PU Weight: approx. 24 kg
Bar thickness of the tips: 2.0 mm
Bar length of the tips: 150 mm (without bar)
Center spacing: 25 mm
Technology: 3-fold spot welded
Strap length: 1 000 mm (with 6 oval holes 4.2 x 10 mm)
Band width: 18 mm
Band thickness: 0.8 mm
Material: 1.4301 stainless steel
Dimensions: 100cm x 17cm x 0,1cm
PU: 80lfm
PU Dimensions: 104cm x 15cm x 21cm
PU Weight: approx. 24 kg
Installation Notes / Tips:
- pay attention to the temperatures! No sticking to warm/hot modules. Therefore, if possible, start in the early hours of the morning (especially in the summer, before the panels heat up)
- before gluing, all surfaces should be cleaned. Only use alcohol-based cleaners or primers (surface should be free of dust and grease, no solvent!)
- To ensure good adhesion, the entire surface should be glued (do not use the glue sparingly), in addition, the profiles can be roughened with a metal brush or sandpaper. With a cartridge, up to 12 m should be glued over the entire surface (no more!), and the glue should also come out on the side and over the holes. After gluing, a 2 mm thick adhesive layer should still remain between the solar system and the spikes so that the materials can expand. If the tips are dismantled, the system remains undamaged.
- For older systems, outside the warranty period, the PV spikes can also be attached with screws. Please check first that there are no cables behind the frame
Application:- before gluing, all surfaces should be cleaned. Only use alcohol-based cleaners or primers (surface should be free of dust and grease, no solvent!)
- To ensure good adhesion, the entire surface should be glued (do not use the glue sparingly), in addition, the profiles can be roughened with a metal brush or sandpaper. With a cartridge, up to 12 m should be glued over the entire surface (no more!), and the glue should also come out on the side and over the holes. After gluing, a 2 mm thick adhesive layer should still remain between the solar system and the spikes so that the materials can expand. If the tips are dismantled, the system remains undamaged.
- For older systems, outside the warranty period, the PV spikes can also be attached with screws. Please check first that there are no cables behind the frame
Solar systems
Photovoltaic systems
There aren't any asked questions yet.
Solar Clip G made of stainless steel for 30 mm frames – welded/fixed tips
From
€0.80*
Rahmenhöhe:
30 mm Rahmen
Soft Cleaner 500 ml for Metals and Glazed Surfaces (Removes Grease, Oils, Dust, etc.)
€12.00*
previously €12.00*